skip to main content

HLAC Hydraulically Operated Floor Access Covers

FACTA logo

Hydraulic Access Cover

Operated by single or double acting hydraulic cylinders. Powered by hand operated or electrically driven pumps. Individual Control systems and local control or Ring main hydraulics and centralised operating stations. System pressures around 100 bar for Hand pump systems and 200 bar for electrically driven systems. Tailored Hydraulic solutions for customer needs.

Electrical Control Systems

All SURESPAN powered access covers can be supplied with appropriate control boxes and ancillary pushbuttons, key switches position sensors.
24 v dc actuators suitable for 110v to 230 ac power supplies.
With or without Emergency battery back up power supplies.

Hydraulic Access Hatch - Surespan Ltd Hydraulic Access Hatch - Surespan Ltd
 

 

Self Contained Plug in systems
Systems suitable for connecting into BMS or FAS systems.

Remote wireless operation
Pushbutton, Key Operated, automatic opening/closing from remote sensors.

Programmed sequences and interlocks
Individual Control boxes or system control boxes for as many access covers as necessary.

Tailored Electrical Solutions to meet customer needs.


Hydraulic Access Cover Hydraulic Access Cover Hydraulic Access Cover

Hydraulic Schematic


Hydraulic Access Cover Hydraulic Access Cover

Our larger or heavy duty floor access covers are recommended to be hydraulically operated. Hydraulic cylinders provide a higher power to size ratio to electric actuators therefore cyliners can fit into smaller installed spaces.

Any Surespan access cover can be designed as a hydraulically operated unit, however it is more practical for larger and heavier access covers. The access cover is designed and supplied with hydraulic cylinders fitted between the coaming frame and the underside of the lid.

In general we use single action pushing units to open the cover but they may be designed as double acting if the geometry of the cover dictates the need. Whilst each unit is individual, our entry level, standard configuration of cover consists of;

• Hydraulic cylinders operated by a manual hand pump. The hand pump is generally portable with a quick release connection point at the top of the lid via our locking box unit.

• Our electro hydraulic units have an additional small electrically driven pump and control unit that allows push button or key switch operation of the access cover. The unit is supplied generally in an enclosure for floor mounting depending on the size of the tank assembly. It is also supplied with electrical starting control and associated electrical control gear.

These arrangements are common for single covers. For multiple access cover applications and depending on the location of each cover, a central control point and centralised hydraulic pack can be supplied to operate multiple covers. This should be discussed at the initial stage of enquiry.


SureGrip Logo - Surespan Ltd Non-Slip surface coating

 

Surespan floor access covers can be manufactured using calcined bauxite, a special surfacing material which has been independantly tested and proven to provide high friction contact. It has been specially developed to provide an aesethically pleasing, high durable surface.

Suregrip is available in on any size floor access cover and can be customized for any application, logo or signature which can be provided in a range of colours.

Contact Surespan Sales for further information.


*

Contact Us

Surespan Limited
Leamore Close,
Leamore Enterprise Park,
Walsall, West Midlands,
WS2 7NL, England

Telephone: +44 (0)1922 711185
Fax: +44 (0)1922 714099
E-mail: sales@surespancovers.com

VAT No. 559 605 804.
Registered in England No. 2432359

Social Media

Facebook TwitterFacebook